Error Printer Code ER003 Canon Pixma TS3100 Series

If the printer Canon TS3100 Series jammed paper tears and you cannot remove the paper either from the paper output slot or from the rear tray, or if the jammed paper remains inside the printer, remove the paper following the instructions below.

Note
If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer.

 Canon ts3100 Driver

• Turn off printer and unplug it.
• Retract paper output tray and open cover.
• Check if jammed paper is under FINE cartridge holder.
  If the jammed paper is under the FINE cartridge holder, move the FINE cartridge holder to the far right or left, whichever makes it easier to remove the paper.
  When moving the FINE cartridge holder, hold the FINE cartridge holder and slide it slowly to the far right or left.
• Hold jammed paper firmly in both hands.
• Slowly pull out paper, so as not to tear it.
• Make sure all jammed paper is removed.
  If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and remove any remaining paper.
• Close cover.
  All jobs in the print queue are canceled. Redo the printing.

Note
When reloading the paper, make sure you are using suitable paper and loading it correctly. If a paper jam message appears on your computer screen when you resume printing after removing all the jammed paper, there may be some paper still inside the printer. Check the printer again for any remaining bits of paper.